RT6 Rotoscreed Cold End T-bar
In stock
The RT6 Cold End Roller Striker T-bar can be purchased as a replacement part for the RT6.
This product connects to a roller tube which are to be spun across concrete slabs by the RT6. The side which connects to the 'Hot End' is part of the RT6 and the 'Cold End' is held by an operative via this T-bar handle.
Powered by the petrol Honda GX35 motor. This method of concrete levelling allows two operatives to control the tube which is 4.5" in diameter. It take two people to operate this concrete levelling equipment which spans either side of the form work to spin the concrete level. The tube spins away from operative which will pick up high points in the concrete and places them into low points. A popular piece of kit which is designed for concrete professionals.
The RT6 Rotoscreed is a lightweight mechanically driven unit which works off a simple drive chain. This easy to maintain concrete levelling tool is easy to transport and reliable on site.
The unit is compact, portable and lightweight. The larger roller screeds such as the RT10 and the Bunyan Striker run longer tubes with a 6" diametre (see related products below). The RT6 Rotoscreed is ideal for small pours and metal decking jobs. The lack of hydraulic hoses means the unit is very easy to clean.
The RT6 comes equip with a 6 metre 4 inch diameter tube and removable drive ends. Please get in touch if you require to separately purchase replacement tubes or cold end handles.
Powered by a Honda GX35 unit the RT6 provides ample power and unparalleled reliability for concrete screeding professionals.
Specifications
• Power Unit with Pull Handle, Kickstand and Tube Plug weigh only 15.8kg (35lbs)
• The power unit and opposite (cold end) handles are quickly connected with pull pins
• Roller Screed Plug ends are easily interchanged with 1/2" wrench
• Concrete stays fresh on the roller for easy cleaning
Accessories
Alternative Products
