Sitecure Sealer Premium 25ltrs
In stock
Used by concrete professionals as a sealer which can produce a high gloss finish.
Sitecure Sealer Premium is a clear acrylic polymer resin solution used primarily for application to surfaces of freshly laid concrete where it has a double function, firstly to form a highly effective curing membrane that conforms to ASTM C309 and secondly to act as an in-depth sealer for the hardened concrete rendering its surface dustproof and extremely hard wearing. Its secondary function and benefits are also applicable when the material is applied to existing concrete surfaces.
APPLICATION: Stir or agitate before use. to avoid blooming or poor adhesion apply when substrate/floor is above 30C. Do not dilute Sitecure Sealer Premium. Apply by fan-jet sprayer to achieve a minimum coverage of 6m2 per litre immediately after final finishing and when surface water is no longer evident.
When sealing old concrete floors, remove contaminants and stains such as waxes, grease and oil with strong soaps or caustics rather than acids. The surface must be clean and dry which permits easier penetration. On very porous surfaces a rapid absorption of the material may be evident, an additional coat will be required after the first has become touch-dry, failure to do this could produce a floor with a lower gloss appearance which could appear matt if the floor is particularly porous. We always recommened producing a test patch. When applying via a sprayer ensure pump pressure should be maintained at a level producing a fine spray. Clean fine spray nozzle thoroughly with solvent cleaner immediately after spraying.
STORAGE: Store in cool, well ventilated area. Keep container tightly closed. Keep away from sources of ignition. Prevent the build up of electrostatic charge in the immediate area. Ensure lighting and electrical equipment are not a source of ignition.
Accessories
